Balcrank Tiger HP 6:1

Balcrank Tiger HP 6:1

The Tiger® HP 6:1 ratio double acting pump is engineered for outstanding performance and reliability to dispense lubricating oils and similar products up to SAE 90. Tiger® is the largest of the Pride series pumps. Pride series pumps are manufactured with a mechanical air valve and piston design which is more forgiving to environments with contaminated air. The 6:1 version is a medium pressure pump for suppling higher pressures and longer pumping distances. The larger 3.2” air motor makes this pump ideal for larger users who need higher flow rates and slower pump cycle rates.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

1130-019 - 6:1 Bare carbon steel stub pump
1130-025 - 6:1 Bare carbon steel stub pump, flange mount
1130-026 - 6:1 Bare carbon steel stub pump with bung adapter
1160-007 - 6:1 Bare stainless steel stub pump with bung adapter
Fluid Types:
  • Anti-freeze (1160-007)
  • Synthetic and mineral based lubricants
  • Hydraulic fluid
  • Transmission fluid
  • Gear Oil

Pump ratio 6:1
Operating air pressure 40 - 150 psi (3 - 10 bar)
Cycles per gallon 31 cyc/gal (8.2 cyc/liter)
Max. Free Flow 16 gal/min (61 l/min)
Air inlet 3/8" NPT(F)
Fluid inlet 1" NPT(F); 1-1/2" NPT(M)
Fluid outlet 3/4" NPT(F)
Recommended Fluids(1160-007) Anti-freeze
Wetted materials (1130-019 & 1130-025 & 1130-026) Carbon Steel, Buna-N™, Stainless Steal, Aluminum, Ultrathane
Wetted materials (1160-007) Stainless Steal, and Viton

  • Pressure relief on Pride Series models – built-in safety feature reduces premature wear of hoses and seals.
  • Mechanical air valve – more reliable, no stalling and no icing.
  • Designed for lower air consumption – extends compressor life.
  • Built in muffler – results in quiet operation and eliminates icing.
  • Stainless steel pump rod – reduces corrosion and extends seal life.
  • Double acting pump – delivers consistent fluid flow with greater dispensing accuracy.

NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage fluid distribution system components. Pressure relief valve, 3120-086 is recommended (included). Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor

NOTE: Warning! Do not use any Tiger series products with flammable fluids.