Balcrank Panther HP 3:1

Balcrank Panther HP 3:1

The Panther® HP 3:1 ratio double acting pump is engineered for outstanding performance and reliability to dispense lubricating oils and similar products up to SAE 90. Pride Series pumps are manufactured with a mechanical air valve and piston design which is more forgiving to environments with contaminated air. The 3:1 version is a medium pressure pump for suppling higher volume than the 5:1 version but at lower operating pressures ideal for medium pumping distances and overall flow rates of 4-5 gpm.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

1130-015 - 3:1 Bare carbon steel stub pump
1130-017 - 3:1 Bare carbon steel stub pump, flange mount
1130-020 - 3:1 Bare carbon steel stub pump with bung adapter
Fluid Types:
  • Synthetic and mineral based lubricants
  • Hydraulic fluid
  • Transmission fluid

Pump ratio 3:1
Operating air pressure 10 - 150 psi (7 - 10 bar)
Cycles per gallon 34 cyc/gal (8.98 cyc/liter)
Max. Free Flow 8 gal/min (30 l/min)
Air inlet 1/4" NPT(F)
Fluid inlet 1" NPT(F); 1-1/2" NPT(M)
Fluid outlet 3/4" NPT(F)
Wetted materials Steel, Nickel Plated Steel, Stainless Steal, Aluminum, Ultrathane, Buna-N™, and Nylon

  • Pressure relief on Pride Series models – built-in safety feature reduces premature wear of hoses and seals.
  • Mechanical air valve – more reliable, no stalling and no icing.
  • Designed for lower air consumption – extends compressor life.
  • Built in muffler – results in quiet operation and eliminates icing.
  • Stainless steel pump rod – reduces corrosion and extends seal life.

NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage fluid distribution system components. Pressure relief valve, 3120-086 is recommended (included). Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor

NOTE: Warning! Do not use any Panther series products with flammable fluids.