Balcrank LYNX 1:1

Balcrank LYNX 1:1

The LYNX series pump is perfect for small volume users, for synthetics, gear oils, and standard mineral oils. The 1:1 version is best for higher volume with short distance requirements such as oil bars, tapper pumps and medium to light viscosity oils pumping short distances. Balcrank Lynx 1:1 Pumps are used by automotive quick lube facilities, dealerships, fleet, and commercial vehicle applications.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

1110-010 - 1:1 Bare Stub Pump with Bung Adapter
1110-009 - 1:1 Bare Drum Pump with Bung Adapter
1160-008 - 1:1 Bare stainless steel drum pump with bung adapter
Fluid Types:
  • Synthetic and mineral based lubricants
  • Hydraulic fluid
  • Transmission fluid
  • Anti-freeze/windshield wash fluids(stainless version)

Pump ratio 1:1
Operating air pressure 45 -150 psi (3 -10 bar)
Cycles per gallon 31 cyc/gal (8.2 cyc/liter)
Max. Free Flow (1110-010 & 1110-009) 10.6 gal/min (40 l/min)
Max. Free Flow (1160-008) 8.2 gal/min (30 l/min)
Air inlet 1/4" NPT(F)
Fluid inlet(stub only) 1" NPT(F)
Fluid outlet (1110-010 & 1110-009) 3/4" NPT(F)
Fluid outlet (1160-008) 3/4" NPT(M)
Wetted materials (1110-010 & 1110-009) Steel, Brass, Aluminum, Buna-N™, and Polyurethane
Wetted materials (1160-008) Stainless steel, Viton, and PTFE

  • Double acting pump – Pumping product on both the up and down stroke providing smooth and reliable flow and pressure.
  • Patented air valve – designed to operate with lower air consumption.
  • Air valve design has fewer components – for reliable operation; easy and economical maintenance.
  • Factory lubricated air motor – no need for air lubricator.
  • Built in sintered brass air filter – assures clean and quiet operation.
  • Anodized aluminum air piston – corrosion resistant, less sensitive to moisture in air system.
  • Height adjustable 2” bung adapter – to fit all types of drums, drum covers, tanks, etc.
  • Pump inlet easily accepts a variety of extensions – to fit all types and sizes of tanks and containers.

NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage fluid distribution system components. Pressure relief valve, 3120-086 is recommended (not included). Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor

NOTE: Warning! Do not use any Lynx series products with flammable fluids.