Balcrank Lion 600 12:1

Balcrank Lion 600 12:1

Lion™ 600 12:1 operates at slow cycle rates for large shops requiring long pumping distances. High pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. High pressure pump is recommended for long pumping distances and/or cold weather applications.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

1430-006 - Lion™ 600 12:1 stub pump
Fluid Types:
  • Synthetic and mineral based lubricants
  • Hydraulic fluid
  • Transmission fluid
  • Gear Oil

Pump ratio 12:1
Operating air pressure 30 - 180 psi (2 - 12.4 bar)
Cycles per gallon 11 cyc/gal
Max. Free Flow 17 gal/min (65 l/min)
Air inlet 1/2" NPT(F)
Fluid inlet 1-1/2" NPT(F)
Fluid outlet 3/4" NPT(F)
Wetted materials Cast iron, hard chromed steel, steel, polyurethane and Buna-N™

NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage fluid distribution system components. Pressure relief valve, 3120-086 is recommended (included). Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor

NOTE: Warning! Do not use any Lion 450/600 series products with flammable fluids.