Balcrank Lion 450 6:1

Balcrank Lion 450 6:1

The Lion 450 6:1 is a Medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. Medium/high pressure pump is recommended for longer pumping distances.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

1430-002 - Lion™ 450 6:1 stub pump
Fluid Types:
  • Synthetic and mineral based lubricants
  • Hydraulic fluid
  • Transmission fluid
  • Gear Oil

Pump ratio 6:1
Operating air pressure 30 - 180 psi (2 - 12.4 bar)
Cycles per gallon 11 cyc/gal
Max. Free Flow 26 gal/min (98 l/min)
Air inlet 1/2" NPT(F)
Fluid inlet 1-1/2" NPT(F)
Fluid outlet 3/4" NPT(F)
Wetted materials Cast iron, hard chromed steel, steel, polyurethane, Buna-N™, and zinc

NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage fluid distribution system components. Pressure relief valve, 3120-086 is recommended (included). Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor

NOTE: Warning! Do not use any Lion 450/600 series products with flammable fluids.