Balcrank Lion 450 3:1

Balcrank Lion 450 3:1

The Lion 450 3:1 is a medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. Medium pressure pump is recommended for moderate pumping distances. Wall or floor mount only. Pump OD does not fit 2” bung adapter.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

Model#:
1430-001 - Lion™ 450 3:1 stub pump
Fluid Types:
  • Synthetic and mineral based lubricants
  • Hydraulic fluid
  • Transmission fluid
  • Gear Oil

Specifications
Pump ratio 3:1
Operating air pressure 30 - 180 psi (2 - 12.4 bar)
Cycles per gallon 6 cyc/gal
Max. Free Flow 32 gal/min (120 l/min)
Air inlet 1/2" NPT(F)
Fluid inlet 1-1/2" NPT(F)
Fluid outlet 3/4" NPT(F)
Wetted materials Steel, Hard Chromed Steel, Zinc Plated Steel, Stainless Steel, Cast Iron, Polyurethane, Buna-N™, and Bronze Filled PTFE



NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage fluid distribution system components. Pressure relief valve, 3120-086 is recommended (included). Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor

NOTE: Warning! Do not use any Lion 450/600 series products with flammable fluids.