Balcrank CenterFlo CF65

Balcrank CenterFlo CF65

CenterFlo CF65 pumps can handle a wide range of fluids used for vehicle service. Typical applications are high volume transferring, bulk fill, and evacuation up to 65 gal/min. They can be used as standalone pumps for transfer applications or as systems pumps that include hose reels.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

Model#:
1120-033 - CF65 Diaphragm Pump
1120-039 - CF65 Diaphragm Pump Buna-N™
Fluid Types:
  • Anti-freeze (Glycol)
  • Light viscosity fluids
  • Windshield wash solution
  • Synthetic and mineral oil
  • Used oil and anti-freeze

Specifications
Operating air pressure 22 - 102 psi (1.5 - 7 bar)
Max. Free Flow 65 gal/min (250 l/min)
Air inlet 1/2" NPSM(F)
Fluid inlet 1 - 1/2" NPT(F) + ANSI flange B16.5 150 lb
Fluid outlet 1 - 1/2" NPT(F) + ANSI flange B16.5 150 lb
Wetted materials Aluminum, Acetal, Buna-N, Stainless Steel

Features:
  • Superior performance against back pressure, nominal loss of flow and pressure capacity, under real application conditions is minimized.
  • Significant dry suction lift, eliminate self-priming issues when pumping from drums or tall tanks.
  • Dependable lube-free directional pivot air valve: starts-up every time.
  • Tolerant of oil, moisture and dirt, non-icing, no air leaks when pump is stalled against head pressure of the system.
  • Reduced air consumption per gallon pumped, saves energy, and avoids the need to use a larger compressor.
  • Reduced pulsation gives greater measurement accuracy and less splashing during dispense.
  • In-line servicing of air valve, diaphragms, and ball valves, without disconnecting from the fluid distribution line.
  • Compact design allows this pump to fit in small spaces.


NOTE: Balcrank does not recommend pumping windshield wash or any other fluid below 100° flash point.

NOTE: ANSI B16.5 150 lb flange connection: 4 bolts - UNC 1/2” - 13 (3.87” between centers)