Balcrank CenterFlo CF15 Mixing

Balcrank CenterFlo CF15 Mixing

CenterFlo CF15 Mixing pumps have a dual inlet for 1:1 ratio mixing of fluids with similar viscosities, like windshield wash or anti-freeze with water. All dual inlet pumps have 2 x 2 - 3/8” NPT(F) inlet ports.

Call us TODAY at 727-835-0671 or
Toll Free at 800-761-4298

Get A Free Quote!

Model#:
1120-028A - CF15 Polypropylene Mixing
Fluid Types:
  • Anti-freeze (Glycol)
  • Windshield wash solution

Specifications
Operating air pressure 22 - 102 psi (1.5 - 7 bar)
Max. Free Flow 15 gal/min (50 l/min)
Air inlet 3/8" NPSM(F)
Fluid inlet 2 - 3/8" NPT(F)
Fluid outlet 1/2" NPT(F) & flange
Wetted materials Teflon, Viton, Polypropylene, Stainless Steel, Acetal, and Hytrel

Features:
  • Superior performance against back pressure, nominal loss of flow and pressure capacity, under real application conditions is minimized.
  • Significant dry suction lift, eliminate self-priming issues when pumping from drums or tall tanks.
  • Dependable lube-free directional pivot air valve: starts-up every time.
  • Tolerant of oil, moisture and dirt, non-icing, no air leaks when pump is stalled against head pressure of the system.
  • Reduced air consumption per gallon pumped, saves energy, and avoids the need to use a larger compressor.
  • Reduced pulsation gives greater measurement accuracy and less splashing during dispense.
  • In-line servicing of air valve, diaphragms, and ball valves, without disconnecting from the fluid distribution line.
  • Compact design allows this pump to fit in small spaces.


NOTE: Balcrank does not recommend pumping windshield wash or any other fluid below 100° flash point.

NOTE: Balcrank recommends Pressure relief valve kit 3120-201 for this pump, not included.